CNEN

USB Audio series

KT0200

产品概述

KT0200 is a USB audio codec single-chip that provides processing USB audio signals.
KT0200 integrates many interfaces including the stereo analog output, mono analog microphone input, low-noise microphone amplifier, low-noise microphone bias circuit, Class-G audio power amplifier, audio digital signal processor, clock oscillator, DC/DC, USB interface, 2-wire interface, etc.
KT0200 integrates a USB 2.0 function controller and transceiver, it is compatible with full-speed mode, USB HID device class 1.11 and Audio device class 1.0. It can support all major commercial operating systems (such as Windows, Linux and Android) without drivers.
KT0200 integrate with an audio digital signal processor (DSP), which can realize the audio processing functions such as audio equalizer (EQ), wind-noise filter (WF), noise gate (NG), automatic noise suppression (ANS), audio dynamic range compression (DRC), etc. It can realize the various audio processing configurations via FLASH.
KT0200 integrates low-noise microphone pre-amplifier and low-noise microphone bias circuit integration. It integrates headset/headphone plug/unplug detection functions. It supports microphone detection functions. The headset-type of OMTP and CTIA can be automatically identified and adapted. High-performance Class-G audio power amplifier can directly drive a 16ohm load without AC coupling capacitor. There is no POP noise while the machine is powered on or off. It can support up to four configurable key inputs.
KT0200 has internal oscillator and no external crystal is required. 6 GPIOs are available for customers. It has the 2-wire interface, PWM output (breathing light), auxiliary ADC input, external interrupt, etc.
KT0200 can meet the needs of various USB headset/headphone products. It has powerful performance and rich features. The total solution which greatly reduce the difficulty and cost of the development. It also improves the reliability and consistency of products, which making products easier to produce.

主要特性

General characteristics
Integrated with audio digital signal processor;
Integrated with a clock oscillator and no need for external crystal;
Single-chip USB audio controller;
Integrated with two channels 8-bit SAR ADC;
Integrated LDO;
Integrated with stereo audio DAC, SNR 103dB, THD-102dB;
Integrated with mono audio ADC, SNR 93.5dB, THD-87dB;
Integrated with audio power amplifier, no need to output AC coupling capacitor;
Integrated with low-noise microphone bias circuit, with adjustable bias voltage;
Integrated with low-noise microphone amplifier circuit;
Headset/headphone plug and unplug detection;
Microphone detect;
OMTP and CTIA headset-type detection and configuration with low-impedance internal switches automatically;
Support up to four configurable key inputs;
Power voltage range (4.5V-5.5V);
Available for configuration of VID, PID and other information;
Integrated with FLASH to allow customer for secondary development programs;
6 configurable GPIO ports;
Breathing light.
 
USB Controller
Conform to the specifications for full-speed transmission mode of USB 1.1/2.0;
Compatible with USB Audio device class 1.0;
Compatible with USB HID device class 1.11;
Driver free;
System wake from headset/headphone plug/unplug or button press.
 
DSP Function
Configurable audio equalizer;
Configurable noise gate function;
Configurable wind-noise filter;
Configurable automatic noise suppression;
Configurable audio dynamic range compression function.
 
Package
QFN-40 5 mm * 5 mm
 
Environmental protection
Compliant with Pb-free and RoHS standards.

主要应用

USB to 3.5mm Jack Converter
USB Headset/Gaming Headset
USB Headphone/Gaming Headphone
USB Microphone
USB Speakers
USB Sound Card
USB Featured Consumer Audio Product
USB Audio Interface Box
USB Monitor
Video Conference System
Microsoft™ Lync/Skype VoIP Headset
Notebook/Netbook Docking
Android Phone/Slate Docking