CNEN

Join Us

Position Number of recruits Education Place of work Recruitment department Time

Analog design engineer
5 Master/Doctor degree Beijing R&D Department 2021-03-11

Analog design engineer
Responsibilities:
1. Responsible for the design of analog and mixed-signal circuits; 
2. Develop circuit requirements indicators, carry out architecture design, design internal circuit module and bottom circuit; 
3. Instruct layout engineers to draw layouts and test and verify chips and write design reports, etc.
Requirements:
1. Master/doctor degree; 
2. A solid theoretical basis for analog circuit design and mastery of mainstream EDA design tools; 
3. Familiar with MATLAB/ VerilogAMS and other tools for circuit system modeling and behavioral simulation ; 
4. Experience in Sigma-delta ADC/DAC, audio codec, DC-DC and other module design , and proficient in one of the modules would be an asset; 
5. Good teamwork spirit

    HR Email:hr@ktmicro.com

Analog/RF IC Design Engineer
5 Master/Doctor degree Beijing R&D Department 2021-03-11

Analog/RF IC Design Engineer
Responsibilities:
1. Design CMOS analog and RF IC circuits, including opamp, LDO, ADC/DAC, PLL, LNA, MIXER, PA and other modules; 
2. Complete circuit module-level structure selection and circuit design; 
3. Assist IC layout design and final chip testing;
Requirements:
1. Master/doctor degree; 
2. Have a deep understanding of simulation and RF integrated circuit design concepts and knowledge, and be able to use matlab and other tools for system modeling, and proficiency in Cadence Circuit design; 
3. Familiar with basic analog and RF modules, such as opamp , bandgap, ADC/DAC, PLL, etc.; 
4. Good teamwork spirit.
    HR Email:hr@ktmicro.com

Application Engineer (AE)
2 R&D Department Beijing R&D Department 2021-03-11

Application Engineer (AE)
Responsibilities
1. 1. Develop an overall test plan according to the testing or verification requirements of IC products; 
2. Responsible for the device selection, schematic design and PCB design of the test board or verification board; 
3. Responsible for the writing and testing of the test program and setting up the environment, including 8051, PC software programming, etc.; 
4. Responsible for the debugging of board-level hardware circuits, understanding the cooperative working principle of software and hardware, understanding the application scenarios of the product, and analyzing the problems encountered in the positioning test; 
5. Responsible for various instruments use and operation of equipment and building an automated test system; 
6. Complete test and data recording of each test item, sort and analyze data, complete and maintain test documents;
Requirements:
1. Familiar with hardware circuit design and have experience in schematics and PCB design; 
2. Familiar with embedded development such as single-chip microcomputers and have 8051 use experience; 
3. Familiar with commonly used test instruments, such as oscilloscopes, spectrum analyzers, etc.; 
4. Understand PC interface software development, and understand programming languages such as VC++ ; 
5. Have the theoretical foundation of radio frequency or audio circuit and understand the meaning of various indicators and test methods; 
6. Have strong hands-on ability and have any experience in component welding; 
7.Have good communication and expression skills, and be able to quickly understand the project requirements and product design documents; 
8. Have strong problem-research-solving-analyzing ability and be professional and responsible, proactive and have a good teamwork spirit

    HR Email:hr@ktmicro.com

Communication Algorithm Engineer
2 Master degree or above Beijing R&D Department 2021-03-11

Communication Algorithm Engineer
Responsibilities
1. Carry out digital communication system architecture design, modeling and simulation according to product requirements; 
2. Responsible for the research, optimization and fixed-point realization of key algorithms on the physical layer of digital communication systems; 
3. Participate in the RTL realization and verification of digital communication systems, and write design documents;
Requirements
1. Master degree or above in communications, digital signal processing, electronic information or other related majors; 
2. Solid theoretical foundation of digital communication and signal processing; 
3. Proficient in C/C++ or Matlab /Simulink, etc. for digital communication system simulation; 
4. Proficiency in GFSK/QAM/OFDM signal processing algorithms, WIFI/BT/Zigbee baseband system development experience would be an asset; 
5. Proficiency in algorithm fixed-point development and experience in RTL programming would be an asset;
6. Have a deeper understanding of wireless communication modulation and demodulation, up-down conversion, radio frequency interfaces, etc.; 
7. Work seriously and have a good teamwork spirit
    HR Email:hr@ktmicro.com

Sound processing algorithm engineer
2 Master degree or above Beijing R&D Department 2021-03-11

Sound processing algorithm engineer
Responsibilities:
1. Responsible for the design and development of algorithms related to voice and audio signal processing such as active noise reduction, echo cancellation, howling suppression, and virtual surround; 
2. Responsible for the code transplantation and optimization of related functional modules for voice and audio signal processing and writing related driver and debugging documents; 
3. Responsible for tracking the latest development of audio standards and noise reduction algorithms;
Requirements:
1. Master degree or above in communications, digital signal processing, electronic information or other related majors; 
2. Solid theoretical foundation of digital communication and signal processing; 
3. Proficient in C/C++ or Matlab /Simulink, etc. for digital communication system simulation; 
4. Proficiency in GFSK/QAM/OFDM signal processing algorithms, WIFI/BT/Zigbee baseband system development experience would be an asset; 
5. Proficiency in algorithm fixed-point development and experience in RTL programming would be an asset;
6. Have a deeper understanding of wireless communication modulation and demodulation, up-down conversion, radio frequency interfaces, etc.; 
7. Work seriously and have a good teamwork spirit
    HR Email:hr@ktmicro.com

software engineer-PAE
2 Bachelor degree or above Beijing, Shenzhen R&D Department 2021-03-11

software engineer-PAE
Responsibilities
1. Responsible for product demonstrations and prototype system hardware and software design, debugging; 
2. Responsible for developing hardware and software design and application and writing related documents; 
3. Solve hardware and software problems and support the work of FAE
Qualifications
1. Proficient in micro-controller programming; 
2. Familiar with FreeRTOS, UCOS and other real-time operating systems;
3. Familiar with SVN or git software version management tools;
4. Be able to develop, debug and locate software independently
5. Familiar with common communication interfaces, such as I2C, SPI, UART, USB, etc
6. Be able to understand the basic circuit diagram, analog circuit knowledge is preferred;
7. Experience in circuit board design would be an asset; 
8.Have the spirit of studying difficult problems, patience, and determination; 
9.Good communication skills.


    HR Email:hr@ktmicro.com

Digital Front End Design Engineer
3 Master degree or above Beijing, Xi\'an R&D Department 2021-03-11

Digital Front End Design Engineer
Responsibilities:
1. Write and design module-level spec; 
2. Module-level modeling and simulation; 
3. Responsible for RTL writing and module-level verification; 
4. Assist gate-level simulation debug.
Qualifications:
1. Experience in RTL programming, RTL simulation and gate-level simulation would be an asset;
2. Candidates with basic knowledge about audio/video codec are preferred 
3. Candidates familiar with C/Perl programming are preferred; 
4. Good English reading and writing skills; 
5. Good teamwork spirit. 
6. Master degree or above, more than 1 year of work experience, electronic engineering, microelectronics, communication or other related majors would be an asset.
    HR Email:hr@ktmicro.com

Digital Back-end Design Engineer
2 Bachelor degree or above Beijing, Xi\'an R&D Department 2021-03-11

Digital Back-end Design Engineer
Responsibilities
1. Complete related digital back-end work from RTL or netlist to GDS as required; 
2. Responsible for the physical design of the top layer and modules, including database preparation/placement and routing/timing analysis/IR drop analysis/physical verification /ECO; 
3. Improve flow, write scripts according to requirements for layout editing/data processing/timing repair, etc.;
Qualifications
1. Bachelor degree or above, at least two years of digital back-end experience; 
2. Familiar with Linux operation System, proficient in the use and configuration of relevant EDA software; 
3. Have the spirit of research, the ability of independently writing scripts such as makefile/shell/tcl ; 
4. Have teamwork spirit and good communication skills, able to withstand the pressure of tapeout. 

    HR Email:hr@ktmicro.com

Digital chip verification engineer
2 Master degree or above Beijing, Xi\'an R&D Department 2021-03-11

Digital chip verification engineer
Responsibilities
1. Responsible for sorting out verification documents and optimizing verification system; 
2. Responsible for module-level subsystem and chip-level functional verification;
3. Responsible for post-imitation environment construction and post-imitation.
Qualifications
1. A required master degree or above in microelectronics, electronics, computer or other related majors; 
2. Have a rigorous and clear logical thinking ability, have the keen attention to details, have the ability to focus on a problem for a long time, have the ability to find and solve problems independently; 
3. Proficient in verilog and system verilog languages, have verification experience; 
4. Proficient in C language; 
5. Being familiar with scripts such as perl, UVM verification methods are preferred; 
6. Familiar with VCS, NCVERILOG and other related EDA tool.
    HR Email:hr@ktmicro.com

Embedded Software Development Engineer
2 Bachelor degree or above Beijing R&D Department 2021-03-11

Embedded Software Development Engineer
Responsibilities
1. Responsible for embedded software project development;
2. Responsible for the application engineering test of the company's Andes / risc-v series processor and 2.4G, 5.8G wireless transceiver products;
3. Complete part of hardware schematic diagram, PCB and other hardware design debugging, sort out hardware development documents;
4. Complete the overall development of software and hardware documentation and file management;
5. Assist document engineer to compile and proofread IC data book and Application guide;
Qualifications
1. Bachelor degree or above in computer, communication, automatic control, electronics or other related majors;
2. Familiar with an embedded operating system, deep understanding of the underlying implementation.
3. Familiar with a CPU architecture and related instruction set.;
4. Familiar with GCC compiling tools, Makefile, GDB debugging tools, profiling performance analysis tools.
5. Familiar with UART, I2C, SPI, I2S, USB interface.
6. Have a strong interest in new technology, and be able to trace the root of the problems encountered;
    HR Email:hr@ktmicro.com